S16CKH1MZ00000 [Carling Technologies]
Rocker Switch, SPDT, Latched, 10A, 28VDC, Laser Etched Rocker Actuator, Panel Mount;型号: | S16CKH1MZ00000 |
厂家: | Carling Technologies |
描述: | Rocker Switch, SPDT, Latched, 10A, 28VDC, Laser Etched Rocker Actuator, Panel Mount 开关 光电二极管 |
文件: | 总4页 (文件大小:756K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
INTRODUCING. . . S-Series Rocker Switches
S-Series Rocker Switches
Carling Technologies is pleased to introduce the S-Series rocker switch, designed for use
in the enclosed cabs of todayʼs trucks, providing the vehicle operator with easily
recognizable and simple to operate controls.
FEATURES:
• Abbreviated travel ½ throw actuators
• Ergonomic rockers
• Illumination in up to three detent switch positions
• A non-teasable snap action circuit
• 10A, 24VDC rating
• Space saving compact envelope with clean bezel-less design
• Integrated low insertion force connector and polarized switch base for quick installation
• Illumination and switch circuitry is easily accommodated with the 10 terminal base
These great features, combined with over 1000 available laser etched or padprinted
legends, allow the S-Series to be seamlessly incorporated into just about any cab interior
environment.
General Specifications:
Electrical
Actuator Travel (Angular Displacement)
2 position (1/2 throw). . . . . 12°
Contact Rating . . . . . . . . 10A @ 24VDC
Dielectric Strength . . . . . . 1500 Volts RMS between pole to
pole
3 position (full throw) . . . . 12° from center
Environmental
Operating Temperature . . -40°C to +85°C
Insulation Resistance . . . 50 Megaohms
Initial Contact Resistance. 10 milliohms max. @ 4VDC
Life . . . . . . . . . . . . . . . .
100,000 cycles maintained circuit,
50,000 cycles momentary circuit at
rated voltage and current
Vibration . . . . . . . . . . . .
Per IEC 68-2.6 test Fc and 68-2.47
Test Criteria - no noise or contact
chatter below 10ms.
Contact Material. . . . . . . . Silver tin-oxide
Terminals . . . . . . . . . . . . .110 Tabs, Silver Plated Brass
Operating Temperature. . . -40°C to +85°C
Circuitry . . . . . . . . . . . . . . SP, DP 2 & 3 position,
1/2 or full throw
Cold Test . . . . . . . . . . . . . Per IEC 68-2-1 -40°C for 72 hours
Test Criteria - pre & post test contact
resistance.
Dry Heat Test Criteria . . . . Per IEC 68-2-2 + 85°C for 72 hours
Test Criteria - no loss of circuit during
test, pre & post test contact resist-
ance.
Contact Bounce . . . . . . . . <20 milliseconds
Handling Shock . . . . . . . . Drop from height of 1 meter, 3 times,
4 sides. Test criteria - No loss of cir-
cuit during test, pre & post test con-
tact resistance.
Mechanical
Endurance . . . . . . . . . . . 250,000 cycles minimum
Thermal Shock . . . . . . . . Per IEC 68-2-14, -40°C to +85°C.
Test criteria - pre & post test contact
resistance.
Physical
Lighted . . . . . . . . . . . . . . LED - rated 100,000 hours 1/2 life
(LED is internally ballasted for volt-
ages to 24VDC.)
Mounting Specifications
Snap in Mount . . . . . . . . 40mm x 20mm keyed hole (see di-
mensional specifications for details.)
Bracket. . . . . . . . . . . . . . Acetal
Base . . . . . . . . . . . . . . .
Nylon 66 GF
Rocker . . . . . . . . . . . . . . Polycarbonate
Weight . . . . . . . . . . . . . . 25 gms max.
Product Bulletin #129
June 2009
Connector
Amp/Tyco MCP 2.8 receptacle housing P/N 1418994-1 mates
with Amp/Tyco MCP 2.8 flat type receptacle. Based on wire
size, choose P/N below:
Carling Technologies, Inc.
60 Johnson Avenue
Plainville, CT 06062-1177
1-968880-1. . . . . . . . . . . . 20-24 awg wire
1-968849-1. . . . . . . . . . . . 17-20 awg wire
1-968851-1. . . . . . . . . . . . 13.5-17 awg wire
Phone:
Fax:
(860) 793-9281
(860) 793-9231
Email:
Web:
sales@carlingtech.com
carlingtech.com
S-Series Rocker Switches
Dimensional Specifications in. [mm.]:
MATES WITH TYCO/AMP MCP CONNECTOR 1418994-1
SEE CONNECTOR INFO. ON SPECIFICATIONS PAGE
FOR DETAILS.
1.529
[38.84]
.787
[19.99]
.100
.83
[2.54]
[21.1]
PANEL KEY
.048
R.016
.220
[1.22]
[.41]
[5.59]
(8 PLACES)
.032
[.81]
R.079
1.575
[2.01]
[40.01]
(4 PLACES)
PANEL THICKNESS: 2.5 0.1ꢀꢀ
PANEL OPENING CLEARANCE: 5°
SCALE 2.000
POS 0
POS 2
12°
POS 1
12°
R
.833 .015
[21.15 0.38]
SWING RADIUS
.82
[20.8]
.790
[20.07]
1.23
[31.2]
1.60
.79
[40.6]
[20.1]
2
S-Series Rocker Switches
18
-
S
00
A R F 0
A
4 4
2 1 Z - 00
1
00
9
10
11
12
2
8
7
3
5
14
1
4
6
16
Legend 3
13
15
Actuator
Color
Legend
Color 1
Legend
Color 2
Legend
Color 3
Circuit
Bracket
Color
Lamp 3
Rating
Lamp 1
Legend Ori-
entation
Series
Illumination
Lamp 2
Legend 1
Legend 2
1 SERIES
S
5,6,7 LAMP (same coding for all 3 selections)
S-Series
Selection 5: specifies lamp 1 located above terminals 1 (+) & 2 (-).
Selection 6: specifies lamp 2 located in center of rocker.
Selection 7: specifies lamp 3 located above terminals 9 (+) & 10 (-).
2 CIRCUIT
No lamp
0
LED
Red
A
Orange
Yellow
Green
Terminal Connections as viewed
(
) - momentary
12VDC
C
D
E
F
H
J
from bottom of switch:
1 - - 2
24VDC
B
SP - single pole uses terminals 3, 5 & 7.
3 - - 4
DP - double pole uses terminals 3, 5, 7 & 4, 6, 8.
5 - - 6
7 - - 8
8 BRACKET COLOR
9 - - 10
Position:
1
5 & 7, 6 & 8
ON
2
3
3 & 5, 4 & 6
ON
1
Black
SP DP
Connected Terminals
4
Dark Carbon
16
26
OFF
18
28
(ON)
OFF
(ON)
SPECIAL CIRCUITS
31
41
42
43
44
45
46
47
(6 & 8)
4, 5, 6, 7
OFF
OFF 1
NONE1
NONE1
NONE1
NONE
9 ACTUATOR
51
52
53
54
55
56
57
752
98
ON
(ON)
Black Titan Gray Dark Carbon
OFF
Standard Rocker, Laser Etched
M
N
R
(ON)
3 & 5
ON
3 & 5
(ON)
OFF
ON
NONE
5 & 7
ON
NONE
5 & 7
(ON)
10, 11, 12 LEGEND COLOR
(5 & 7, 3 & 6)
(5 & 7, 2 & 6)
5 & 7, 4 & 6
5 & 7, 4 & 6
(3 & 5, 4 & 6)
(5 & 9, 4 & 6)
Z
No legend
1
Clear
3 RATING
1
0.4VA 28VDC Resistive
10.5mA 1.5A 28VDC,
5
13 LEGEND 1
00 No legend
3
A
5A 28V 50A Inrush Lamp Load
3.5A 28VDC, 18A Inrush
10mA 10A 28VDC
4
3
B
C
ORIENTATION
1
14 LEGEND ORIENTATION
4 ILLUMINATION
0
1
2
3
4
No legend
LAMPS
ILLUMINATION
INDEPENDENT
LAMP WIRED TO TERMINALS
Orientation 1
Orientation 2
Orientation 3
Orientation 4
S
A
C
NONE
–
1
INDEPENDENT 1 (+) 2 (–)
INDEPENDENT 1 (+) 2 (–)
INDEPENDENT 9 (+) 2 (–)
INDEPENDENT 1 (+) 2 (–)
INDEPENDENT 9 (+) 10 (–)
INDEPENDENT 1 (+) 2 (–)
PARALLEL
1
M22ZA8-13H-10000
ORIENTATION
ORIENTATION
2
4
2
D
E
F
1
M22ZA8-23H-10000
2
1 & 3
ORIENTATION
3
1
INDEPENDENT 1 (+) 10 (–)
SNAP
6
15,16 LEGEND 2,3
G
H
J
1 & 2
1 & 2
1, 2 & 3
INDEPENDENT 1 (+) 10 (–)
00 No legend
DEPENDENT
9 (+) 2 (–)
INDEPENDENT 1 (+) 2 (–)
DEPENDENT 9 (+) 10 (–)
INDEPENDENT 1 (+) 2 (–)
NOTES
1
2
3
4
5
6
Indicates 1/2 travel for actuator.
Snap-Action Contact Mechanism
Not available with circuit 98.
Available with circuit 98 only.
Located over T1-2.
DEPENDENT
5 (+) 10 (–)
INDEPENDENT 1 (+) 2 (–)
INDEPENDENT 1 (+) 2 (–)
INDEPENDENT 9 (+) 10 (–)
3.3K RESISTOR IN PARALLEL
K
1 & 2
Legend 2 located in center of rocker, Legend 3 located over T9-10.
Legend 2 options are limited due to a very small marking area. Consult
factory for specifics.
3
Carling Technologies, Inc., Product Bulletin #129• June 2009 • 860-793-9281 • sales@carlingtech.com • www.carlingtech.com
相关型号:
S16CKJ1MZ00000
Rocker Switch, SPDT, Latched, 10A, 28VDC, Laser Etched Rocker Actuator, Panel Mount
Carling Techn
S16D30C-LF
Rectifier Diode, Schottky, 1 Phase, 2 Element, 8A, 30V V(RRM), Silicon, ROHS COMPLIANT, PLASTIC, TO-3P, 3 PIN
WTE
©2020 ICPDF网 联系我们和版权申明